verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke75 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$139.80 $147.30Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75

The AirTAC SAIJ80X75-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits the effective travel to be dialed back by up to 75 mm. This wide adjustment range creates a highly flexible 0 to 75 mm usable window, allowing precise end-position tuning without swapping the entire actuator.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It uses a PT tapered G3/8 port and a 25 mm carbon steel rod. The rear adjuster acts purely as a mechanical stop for deceleration and does not hold the load without live air pressure.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80X75-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke75 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75 Is Used

tune

Variable End Stops

Dial in the exact retract distance from 0 to 75 mm during commissioning to hit precise depth targets without machining custom spacers.

settings_input_component

Machine Changeover

Quickly adapt the stroke window when switching product sizes on a line, using the rear screw to set a new retracted position.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75 the Right Cylinder?

Select this 80 mm bore when an application requires substantial force but the exact end-stop varies per job. If you need less thrust, stepping down to a 63 mm bore yields 1559 N at 0.5 MPa. The SAIJ80X75-75 is chosen over a fixed SAI cylinder when a machine requires frequent product changeovers, letting you fine-tune the retract stroke on the fly rather than adding external stops. For load-holding without continuous air, use an SAIL or BSAI cylinder instead, as this adjuster is not a lock.

Because the nominal 75 mm stroke is short, side-loading is minimal, but the 25 mm rod and M20x1.5 thread provide high rigidity. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75 FAQ

The rear adjuster screw lets you shorten the nominal 75 mm stroke by up to 75 mm, providing a usable travel window of 0 to 75 mm. It acts as a mechanical stop and does not lock the load without live air.

At 0.7 MPa, the push force increases to 3518 N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ80X75-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.