
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
Because the 75mm adjustment range matches the nominal stroke, the effective travel window can be dialed anywhere from 0 to 75mm. This extreme adjustability allows you to set exact end-stops during commissioning without swapping out the physical cylinder.
It features a carbon steel piston rod and a PT tapered port thread. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors, which seat directly into the dual-side barrel grooves. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB and CA styles found in some other series.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact travel distance from 0 to 75mm on the fly for machines processing multiple product sizes on the same line.
Eliminate the need to physically swap cylinders during setup; simply turn the rear adjuster screw to perfect the final end position.
Choose this 80mm bore when an application demands high thrust (up to 2513N at 0.5 MPa) but the exact travel distance varies by product size. The rear adjuster screw acts purely as a travel stop for fine-tuning end positions; it does not hold the load without live air. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series instead.
When matching this ISO 15552 cylinder for a replacement, verify the 80mm bore, 75mm stroke, 75mm adjustment range, PT port, and the -S magnet. The 25mm rod and M20x1.5 thread provide robust resistance to side loading, though any long unsupported travel still requires an external guide.
Quick checklist
The maximum thrust is 513 kgf at 1.0 MPa.
The rear adjuster screw lets you reduce the 75mm nominal stroke down to 0mm, creating a 0-75mm usable travel window. It acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.