verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X80-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke80 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$144.66 $152.16Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30

The AirTAC SAIJ80X80-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. By integrating an external adjusting screw at the rear, this model allows you to shorten the effective travel, providing a usable stroke window of 50-80mm for precise end-position tuning during commissioning.

Because the adjuster acts purely as a mechanical stop, it enables fine-tuning of the retract position without swapping out the entire cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready to accept CMSE reed or DMSE electronic switches if a magnet is added later. Mounting options are comprehensive yet specific to this adjustable series, utilizing Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets while omitting FB, CA, CB, and CR styles.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80X80-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke80 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30 Is Used

tune

Product Size Changeover

Quickly dial in the 50-80mm travel window during format changes on a packaging line, using the rear screw to set exact retract positions for varying product lengths.

factory

Variable End-Stop Forming

Adapt a single standard cylinder to multiple pressing depths in light assembly tasks, relying on the adjustable stop to set precise material forming distances.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30 the Right Cylinder?

The 30mm adjustment window is ideal for product-size changeovers on a line, allowing operators to dial in the exact 50-80mm travel without re-engineering the machine layout.

For an exact ISO 15552 replacement match, verify the 80mm bore, 80mm nominal stroke, 30mm adjustment code, G3/8 PT ports, and your required mounting bracket. Remember that the rear stopper and variable air cushions only decelerate the load; they do not hold it without live air. If your setup requires true load-holding on air loss, consider the SAIL pneumatic lock, BSAI clamp-lock cylinder, or an external rod lock. The standard carbon steel rod handles high axial loads well, but always ensure external guides support any lateral forces.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30 FAQ

At 0.7MPa, the push force increases to 3518N.

The rear adjuster acts as a mechanical stop that lets you trim the effective travel back by up to 30mm. This creates a usable stroke window of 50-80mm, allowing you to set the exact retract position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-30

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ80X80-30 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.