
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X80-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X80-40 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the external adjustment screw, you can shorten the nominal 80mm stroke by up to 40mm, creating a highly flexible 40-80mm usable travel window.
This built-in rear stopper allows for fine end-position tuning at commissioning without swapping out the cylinder or bolting on external stops. The adjuster acts purely as a travel stop to set the retract end, meaning it will not hold the load without live air pressure. For load-holding requirements, a SAIL or BSAI variant would be required. The extruded aluminum barrel features sensor grooves on both sides for CMSE and DMSE switches, and the G3/8 port ensures high flow for rapid cycling.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 40-80mm window during machine commissioning to accommodate varying workpiece sizes without changing hardware.
Quickly adjust the stroke stop on the rear screw when switching a production line to a new product length, minimizing downtime.
Choose this 80mm bore when an application requires substantial thrust that a 50mm bore cannot provide, stepping up from 982N to 2513N at 0.5MPa. The adjustable stroke is ideal for product changeovers or variable end-stops on a line, letting operators dial in the exact position without replacing the cylinder. If the load must be held mechanically without air pressure, look to the SAIL lock or BSAI clamp-lock versions instead of this adjustable stopper.
When replacing an ISO 15552 cylinder, match the 80mm bore, 80mm stroke, 40mm adjustment range, PT tapered port thread, and the required mounting interface. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR brackets. The 25mm carbon steel rod and M20x1.5 thread handle high side loads well, but long unsupported strokes still require an external guide.
Quick checklist
At the maximum pressure of 1.0MPa, it delivers up to 513 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from the nominal 80mm down to as little as 40mm, giving you a 40-80mm travel window. It functions as an end-stop, not a lock, so it cannot hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.