
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X80-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 80mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
By integrating an external stopper at the rear, this 80mm bore unit allows you to fine-tune the effective travel down from its 80mm nominal stroke, creating a highly versatile 5-80mm usable window. This adjustability is perfect for dialing in exact end positions during commissioning without swapping hardware.
The extruded aluminum barrel features sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. It utilizes a G3/8 port and a 25mm carbon steel rod with an M20x1.5 thread, providing excellent resistance against side loads. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, giving you flexible installation choices while maintaining standard ISO 15552 dimensions.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X80-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the retract distance from 5 to 80mm when switching between different product sizes on a packaging line.
Fine-tune the end-of-stroke position during machine setup to achieve exact clamping depth without adding external stopper blocks.
Ideal for automated test fixtures where the contact point needs frequent mechanical adjustment rather than reprogramming the PLC.
Choose this 80mm bore when an application requires substantial force—stepping down to a 63mm bore yields 1402N pull at 0.5 MPa, which may be insufficient for heavier fixtures. The SAIJ80X80-75 is selected specifically when the exact retract distance is unknown at design time or varies between product changeovers; a fixed-stroke SAI cylinder cannot offer this 5-80mm mechanical tuning range. Because the 80mm stroke is well under the 300mm side-load threshold, no external guide is strictly required, though the 25mm rod helps manage inherent eccentric loads.
When matching this for an ISO 15552 replacement, verify the 80mm bore, 80mm stroke, 75mm adjustment range, PT tapered port thread, and your preferred mounting bracket. Remember that the rear adjuster acts purely as a travel stop and does not lock the load; if you need true load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw allows you to mechanically shorten the 80mm nominal stroke by up to 75mm, resulting in a usable travel window of 5-80mm. The adjuster acts as a physical stop to set the position and relies on the air cushion for deceleration; it does not lock the load in place.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.