verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X85-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 85mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke85 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$144.66 $152.16Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10

The AirTAC SAIJ80X85-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 75-85 mm, allowing you to dial back the 85 mm nominal stroke by up to 10 mm during commissioning.

This model uses a 25 mm carbon steel rod with an M20x1.5 thread, offering robust resistance to side loads, while the extruded aluminum barrel integrates sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop to fine-tune the end position without needing external stops; it does not hold the load without live air pressure.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80X85-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke85 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×85Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10 Is Used

settings_input_component

Machine Changeover

Dial in the 75-85 mm travel window during product size transitions to set exact end-stops without physically replacing the cylinder.

precision_manufacturing

End-Position Tuning

Use the rear mechanical stopper to precisely trim the 85 mm stroke by up to 10 mm, perfecting the final position during initial machine commissioning.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10 the Right Cylinder?

Choose this 80 mm bore when 50 mm (982 N at 0.5 MPa) is insufficient but 100 mm (3927 N) would be oversized. The 10 mm adjustable range is ideal for product changeovers where exact end-of-stroke positioning varies slightly, saving you from swapping out a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 80 mm bore, 85 mm stroke, PT G3/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 25 mm rod handles side loads well, it suits rigid assemblies, though an external guide is recommended for any unsupported loads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10 FAQ

It operates at speeds ranging from 30 to 800 mm/s.

The rear adjuster lets you mechanically shorten the 85 mm nominal stroke by up to 10 mm, creating a 75-85 mm travel window. It functions as a travel stop, not a lock, so it will not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ80X85-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.