
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X85-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 85mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X85-30 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. By turning the rear screw, you can trim the effective travel back by up to 30mm, creating a precise 55-85mm usable stroke window for exact end-position tuning.
This adjustable stopper allows you to dial in the retract position during commissioning or product changeovers without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE or DMSE switches. Mounting options include the standard SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial in the 55-85mm retract stop when switching a packaging line to a different carton size, ensuring precise positioning without mechanical rebuilds.
Fine-tune the final resting position of a pressing tool during machine commissioning to achieve perfect contact force without adding external shims.
Provide adaptable travel limits on automated assembly stations where multiple part variants require slightly different actuation distances.
The 30mm adjustment range is ideal for machines that process varying product sizes, letting operators set the exact 55-85mm travel limit on the fly. For any stroke at or above 300mm, an external guide is recommended to handle side loads, though this 85mm stroke is well within safe rod limits.
When replacing an ISO 15552 cylinder, match the 80mm bore, 85mm stroke, 30mm adjustment, PT tapered port thread, and desired mounting hardware. Note that the rear adjuster acts purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the nominal 85mm stroke by up to 30mm, creating a usable travel window of 55-85mm. It sets the end position but is not a lock, meaning the cylinder requires live air to hold its load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.