
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X85-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 85mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X85-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 85 mm travel back by up to 40 mm. This creates a highly versatile 45-85 mm usable travel window, letting you dial in the exact end position at commissioning without swapping the unit.
This model uses a 25 mm carbon steel rod with an M20x1.5 thread, providing a rigid interface that handles higher side loads than smaller bores. The extruded aluminum barrel includes sensor grooves on both sides for mounting position switches. It features PT tapered ports sized at G3/8 and variable air cushions at both ends to decelerate the load smoothly.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adjust the 45-85 mm travel window to accommodate new product sizes on a packaging line without replacing the cylinder.
Fine-tune the exact retract stop during commissioning to perfect a pressing or clamping operation without adding external stops.
If your force requirements are lower, stepping down to a 63 mm bore yields 2182 N at 0.7 MPa, while stepping up to a 100 mm bore provides 5497 N. The SAIJ80X85-40 is selected specifically when you need to fine-tune the retract position during machine setup or product changeover, rather than relying on a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 85 mm stroke, 40 mm adjustment range, G3/8 PT ports, and your required mounting style. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series. Because the stroke is under 300 mm, side-load risks are manageable, but an external guide is still recommended for heavy radial loads.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stopper, allowing you to shorten the effective stroke from 85 mm down to as little as 45 mm. This provides a 40 mm tuning window to set the exact retract end position without changing the cylinder.
At 0.9 MPa, the push force increases to 4523 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.