
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X85-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 85mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X85-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the nominal 85 mm travel by up to 75 mm. This creates a highly flexible 10-85 mm usable travel window, letting you fine-tune the retract end-position directly at commissioning without swapping the cylinder or adding external stops.
Equipped with a 25 mm carbon steel rod and an M20x1.5 thread, this 80 mm bore cylinder handles substantial side loads while providing secure mechanical fixing. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches, and the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X85-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position from 10 to 85 mm during product size transitions without physically replacing the cylinder or bolting on external stoppers.
Fine-tune the final end-of-stroke location during machine commissioning to perfect process timing using the built-in rear adjustment screw.
Provide adaptable travel limits on automated lines where multiple stroke lengths are required from a single ISO 15552 profile cylinder assembly.
The SAIJ80X85-75 is dimensionally interchangeable per ISO 15552 and is configured with PT tapered ports, standard carbon steel rod material, and no magnet.
Because the rear adjuster acts as a travel stop rather than a mechanical lock, this cylinder cannot hold a load without live air pressure. For load-holding requirements without continuous air, consider the AirTAC SAIL pneumatic lock or BSAI clamp-lock series instead.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 75 mm from the nominal 85 mm, creating a 10-85 mm usable travel window. It functions as a mechanical stop to set the end position and does not lock the load without live air pressure.
It operates at speeds between 30 and 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.