
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X95-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 95mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X95-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It delivers a robust 2513N pull force at 0.5 MPa and provides a wide usable travel window from 20 to 95 mm by trimming up to 75 mm off the nominal stroke. This built-in adjustability allows operators to fine-tune end positions during commissioning without adding bulky external stops.
The extruded aluminum barrel includes sensor grooves on both sides, and the carbon steel rod features an M20x1.5 thread for secure mounting. The rear stopper acts purely as a travel limit and deceleration point, meaning it will not hold a load without live air pressure. For applications requiring true position holding, consider the related SAIL or BSAI locking cylinders.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X95-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 20-95mm travel window on the fly during product size changeovers, eliminating the need to physically swap out cylinders or reposition external hard stops.
Apply up to 2513N of clamping force at 0.5 MPa while adjusting the retract position by up to 75mm to accommodate different workpiece thicknesses on the same fixture.
Use the wide adjustment range to test multiple stroke lengths and end positions during machine commissioning, finding the optimal travel distance before finalizing the design.
Choose this 80mm bore when you need higher force than the 63mm class (which provides 1402N pull at 0.5 MPa) but want to avoid the larger footprint of a 100mm cylinder. The 75mm adjustment range is ideal for prototyping cells or production lines handling varying product sizes, letting you dial in the exact 20-95mm travel without swapping hardware. Mounting options include the SAIJ subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
To match this ISO 15552 replacement exactly, specify the 80mm bore, 95mm stroke, PT tapered port thread, carbon steel rod, and no magnet. Because the 95mm stroke is relatively short, side-load concerns are minimal, but always ensure the M20x1.5 rod thread is properly aligned to prevent binding. If you need position feedback later, adding the -S magnet option enables CMSE reed and DMSE solid-state sensors.
Quick checklist
At 0.7 MPa, the push force increases to 3518N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75mm from the 95mm nominal length, creating a usable travel window of 20 to 95mm. This stopper only limits travel and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.