
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X950-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X950-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that allows you to trim the effective travel back by up to 75 mm. This yields a usable end-position window of 875 to 950 mm, letting you dial in the exact retract distance during commissioning without swapping hardware.
The carbon steel piston rod features an M20x1.5 thread, engineered to handle substantial side loads, though the 950 mm length means an external guide rail is strongly recommended to prevent rod sag. The extruded aluminum barrel includes dual sensor grooves for CMSE reed or DMSE solid-state switches. Mounting options span Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR configurations.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X950-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance from 875 to 950 mm during machine commissioning to accommodate varying material thicknesses without installing external stopper blocks.
Quickly adapt the stroke end-position on automated lines when switching between different product lengths, reducing setup downtime and avoiding cylinder swaps.
Choose this 80 mm bore adjustable cylinder when your setup requires precise 875-950 mm end-position tuning or frequent product-size changeovers without adding external mechanical stops. Because the 950 mm stroke is long, always pair the cylinder with an external guide to support the load and protect the rod from deflection. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For true fail-safe load holding without pressure, select a SAIL pneumatic lock or BSAI clamp-lock cylinder instead. To replace an ISO 15552 unit, match the 80 mm bore, 950 mm stroke, 75 mm adjust, PT G3/8 port, and mounting interface.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The nominal stroke is 950 mm, but the rear adjuster allows you to shorten the effective travel by up to 75 mm. This creates an adjustable usable window of 875 to 950 mm for fine-tuning the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.