Airtac SC100 Standard Cylinder SC100X1075
The AirTAC Airtac SC100 Standard Cylinder SC100X1075 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1075mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1075 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1075
The AirTAC SC100X1075 is a double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and a 1075 mm stroke, it is built for applications requiring significant linear force over a long travel distance. The piston rod is 25 mm in diameter with an M20x1.5 male thread, and the cylinder features a 29 mm adjustable air cushion at each end to decelerate the load smoothly.
This model uses a PT1/2 port and operates on filtered air from 0.15 to 1.0 MPa. The standard body length A is 188 mm, giving a total extended length of approximately 1263 mm. As a genuine AirTAC SC series unit, it provides a cost-effective solution for heavy-duty automation where a shorter overall length than an ISO 15552 cylinder is acceptable.
Airtac SC100 Standard Cylinder SC100X1075 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1075 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1075 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1075
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1075 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1075 Is Used
Long-Stroke Material Transfer
Pushes or pulls heavy pallets and components across a 1075 mm span on conveyor transfer stations, using its 3927 N force at 0.5 MPa.
Heavy-Duty Clamping
Provides the high force needed for clamping large weldments or structural frames in jigs and fixtures, with the long stroke allowing easy part loading and unloading.
Press Feed Mechanisms
Advances heavy coil stock or sheet metal blanks into stamping presses, leveraging the 7068 N maximum thrust at 0.9 MPa for reliable, repetitive feeding.
Is the Airtac SC100 Standard Cylinder SC100X1075 the Right Cylinder?
Select the SC100 bore when your application requires push forces in the 3927 N range at standard plant pressure. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and cost. For heavier loads, the SC125 (6136 N at 0.5 MPa) is the next step up. With a 1075 mm stroke, the rod is fully extended; always check for potential rod buckling under compressive loads and ensure the load is guided externally to prevent side forces from bending the 25 mm rod. For a direct replacement, match the 100 mm bore, 1075 mm stroke, PT1/2 port thread, basic mounting, and the absence of a magnet sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1075 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
A long, unsupported stroke like 1075 mm is susceptible to rod buckling and side-load damage. Always use an external guide rail or rod alignment coupler to absorb transverse loads. Never allow the cylinder to push a load that is not supported by linear bearings, as side forces will bend the 25 mm rod and damage the piston seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1075
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.