Airtac SC100 Standard Cylinder SC100X112S
The AirTAC Airtac SC100 Standard Cylinder SC100X112S is a genuine double-acting standard air cylinder with a Ø100mm bore and 112mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke112 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X112S
The SC100X112S is a 100 mm bore double-acting tie-rod cylinder with a 112 mm standard stroke, delivering a push force of 3927 N at 0.5 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration for mid-range industrial tasks.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for non-contact position sensing. The body length A is 188 mm, and the PT1/2 port supplies filtered air at 0.15-1.0 MPa.
Airtac SC100 Standard Cylinder SC100X112S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X112S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 112 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X112S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×112 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X112S Is Used
Material Handling Gates
The 3927 N push force at 0.5 MPa and 112 mm stroke actuates diverter gates or stops on conveyor lines, with the built-in magnet providing end-of-stroke confirmation via barrel-mounted sensors.
Clamping & Fixturing
Delivers up to 7068 N of clamping force at 0.9 MPa for holding workpieces during machining or welding. The -S magnet enables sensor feedback to ensure the clamp is fully engaged before the cycle starts.
Palletizing Pushers
Used as a robust pusher arm in palletizing cells, the 100 mm bore provides the thrust needed to slide boxes onto a pallet. The adjustable cushion softens the impact at the end of the 112 mm push stroke.
Is the Airtac SC100 Standard Cylinder SC100X112S the Right Cylinder?
Choose the SC100 bore when your application needs around 3927 N of push force at 0.5 MPa. If you require less force, the SC80 bore provides 2513 N at the same pressure. For higher force, the SC125 delivers 6136 N. Always match replacement cylinders on all five key points: 100 mm bore, 112 mm stroke, PT port thread, the built-in magnet (-S), and basic mounting.
For this 112 mm stroke, the standard tie-rod construction is sufficient for axial loads. If side loads are present, consider an external guide system to protect the rod bearing from bending stress.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X112S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Yes. The -S suffix in SC100X112S indicates a built-in magnet. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X112S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.