Airtac SC100 Standard Cylinder SC100X115S
The AirTAC Airtac SC100 Standard Cylinder SC100X115S is a genuine double-acting standard air cylinder with a Ø100mm bore and 115mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke115 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X115S
The AirTAC SC100X115S is a double-acting tie-rod cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 115 mm stroke suits medium-travel clamping and pressing operations, while the 25 mm diameter piston rod provides robust resistance to bending.
This model includes a built-in magnet, allowing CMSG, DMSG, or EMSG sensors to mount directly onto the barrel for non-contact position sensing. The cylinder operates on filtered air from 0.15 to 1.0 MPa, with an adjustable air cushion to decelerate the 100 mm bore piston smoothly at stroke end.
Airtac SC100 Standard Cylinder SC100X115S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X115S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 115 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X115S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×115 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X115S Is Used
Material Handling Gates
The 3927 N push force at 0.5 MPa operates diverters and transfer gates on conveyor lines, with the built-in magnet providing end-of-stroke confirmation via barrel-mounted sensors.
Pneumatic Presses
Delivers up to 7068 N at 0.9 MPa for light assembly presses and riveting stations. The 25 mm rod and adjustable cushion handle repetitive impact cycles reliably.
Automated Clamping
Used in CNC fixture clamping where sensor feedback from the -S magnet confirms clamp engagement before machining starts, preventing tool crashes.
Is the Airtac SC100 Standard Cylinder SC100X115S the Right Cylinder?
Choose the SC100 bore when your application needs around 3927 N of push force at standard plant pressure. If your load is lighter, stepping down to an 80 mm bore reduces air consumption while still providing 2513 N at 0.5 MPa. For higher force demands, the 125 mm bore offers 6136 N at the same pressure.
When replacing an existing cylinder, match five points: 100 mm bore, 115 mm stroke, PT port thread, the built-in magnet (-S suffix), and basic mounting. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X115S FAQ
At 0.7 MPa operating pressure, the SC100 bore generates 5497 N of push force. The pull force on the retract stroke is 3681 N at 0.5 MPa due to the 25 mm rod reducing the piston area on the rod side.
Yes, the -S suffix equips the piston with a magnet compatible with AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors. These clamp directly onto the barrel tie-rod slots without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X115S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.