verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X120SFA

The AirTAC SC100 Standard Cylinder SC100X120SFA is a genuine double-acting standard air cylinder with a Ø100mm bore and 120mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke120 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$128.38 $135.88Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X120SFA

The SC100X120SFA is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa), making it a prime actuator for medium-to-heavy industrial linear tasks. Its 120 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore, and the 25 mm diameter chrome-plated rod provides excellent rigidity for pushing and clamping operations.

This configuration includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke or mid-stroke position feedback without external brackets. The FA front rectangular flange (F-SC100FA) allows secure panel or bulkhead mounting on the rod side, simplifying integration into machine frames where the cylinder body must be fixed at the front face.

Airtac SC100 Standard Cylinder SC100X120SFA Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X120SFA
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke120 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X120SFA

SCStandard tie-rod cylinder series.
100Bore size in mm.
×120Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X120SFA Is Used

precision_manufacturing

Heavy Part Clamping

The 3927 N force at 0.5 MPa securely holds large weldments or castings in machining fixtures. The FA front flange provides rigid, accurate alignment to the fixture plate.

conveyor_belt

Pallet Stop & Lift

Deploy the SC100X120SFA as a robust pallet stop or lift-and-locate station on heavy-duty conveyors. The built-in magnet sensor confirms the raised or lowered position for interlocking.

compress

Press-Fit Assembly

With up to 7068 N of force at 0.9 MPa, this cylinder handles press-fit insertion of bearings, bushings, or pins. The 25 mm rod resists buckling under the high axial loads of a guided press tool.

Is the Airtac SC100 Standard Cylinder SC100X120SFA the Right Cylinder?

Select the SC100 when your application needs force in the 4000–7000 N range at typical shop air pressures. If your load is lighter, stepping down to an SC80 (2513 N push at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC125 (6136 N push at 0.5 MPa) is the next logical step up.

For a direct replacement, match five key attributes: 100 mm bore, 120 mm stroke, PT port thread, FA front flange mounting, and the -S magnet for sensor compatibility. Always verify the tie-rod body length (A=188 mm) and overall extended length against your existing installation, as the SC series is shorter than ISO 15552 cylinders and is not dimensionally interchangeable with them.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X120SFA FAQ

At 0.5 MPa, the cylinder pushes with 3927 N and pulls with 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

No. The AirTAC SC series is a tie-rod cylinder with a shorter body length (A=188 mm for the 100 bore) than a typical ISO 15552 profile cylinder. It is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 cylinder with matching stroke, port, mounting, and magnet options.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X120SFA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X120SFA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.