
The AirTAC SC100 Standard Cylinder SC100X122 is a genuine double-acting standard air cylinder with a Ø100mm bore and 122mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X122 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, pairing a 100 mm bore with a 122 mm stroke. At 0.5 MPa it generates 3927 N of push force and 3681 N on the pull stroke, placing it in the 4 kN class for medium-heavy linear actuation tasks.
This model uses a 25 mm diameter piston rod with M20×1.5 male threads and PT1/2 ports. The standard TPU/NBR seals give an operating range of -20 to +70 °C, and the 29 mm air cushion at each end is fully adjustable to decelerate loads smoothly at end-of-travel.
| Model | Airtac SC100 Standard Cylinder SC100X122 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 122 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×122 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa reliably stops and transfers loaded pallets on gravity or powered roller conveyors in distribution centres.
Delivers controlled 4 kN-class force for pressing bearings, bushings, or dowels into machined housings on semi-automatic assembly fixtures.
Operates a sliding gate or compaction plate in light industrial compactors, where the 122 mm stroke provides sufficient travel for material discharge.
For applications needing more force, stepping up to the 125 mm bore SC125 series raises push force to 6136 N at 0.5 MPa. If a shorter overall length is critical and 2513 N at 0.5 MPa is sufficient, the SC80 bore is the next step down. The 122 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore.
When replacing an existing cylinder, match five points: 100 mm bore, 122 mm stroke, PT1/2 port thread, any mounting accessory (this unit is basic, so confirm your bracket separately), and the absence of a magnet if sensors are not used. For strokes above 300 mm, consider an external guide to protect the rod from side-load bending, but at 122 mm this cylinder is inherently stiff under axial loads.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the SC100X122 produces 3927 N pushing out and 3681 N pulling in. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 cylinder of the same bore and stroke, so mounting dimensions are not interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT ports, and basic mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.