verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X125CA

The AirTAC SC100 Standard Cylinder SC100X125CA is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke125 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$125.12 $132.62Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X125CA

The SC100X125CA is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 125 mm stroke suit medium-throw clamping and pressing tasks where a rear pivot mount is needed.

This model includes a rear single clevis (CA) mount, part F-SC100CA, allowing the cylinder body to pivot during actuation. It features a 25 mm diameter piston rod, PT1/2 ports, and a 29 mm adjustable air cushion for smooth end-of-stroke deceleration.

Airtac SC100 Standard Cylinder SC100X125CA Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X125CA
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke125 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X125CA

SCStandard tie-rod cylinder series.
100Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X125CA Is Used

precision_manufacturing

Clamping Fixtures

The 3927 N force at 0.5 MPa and rear clevis mount make this cylinder ideal for pivoting clamp arms in welding or machining fixtures.

agriculture

Dump Gate Actuation

With a 125 mm stroke and rear pivot, it reliably opens and closes hopper gates or chute diverters on agricultural processing equipment.

conveyor_belt

Part Diverter

The clevis-mounted body allows the cylinder to swing, pushing parts off a conveyor line with controlled, cushioned motion.

Is the Airtac SC100 Standard Cylinder SC100X125CA the Right Cylinder?

Choose the SC100X125CA when you need a pivoting cylinder with roughly 4000 N of force at standard shop air. If your load requires less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa. For higher force, step up to the 125 mm bore (6136 N at 0.5 MPa).

To ensure a correct replacement, match five points: 100 mm bore, 125 mm stroke, PT1/2 port thread, rear single clevis (CA) mounting accessory, and the absence of a magnet. This is a tie-rod cylinder; it is not dimensionally interchangeable with ISO 15552 profile cylinders.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X125CA FAQ

At 0.5 MPa, it provides 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.

This model comes with the CA rear single clevis (F-SC100CA) for pivoting applications. If you need a basic cylinder without a bracket, order the standard SC100X125. The clevis is integrated into the rear cap and cannot be removed.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X125CA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X125CA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.