
The AirTAC SC100 Standard Cylinder SC100X127 is a genuine double-acting standard air cylinder with a Ø100mm bore and 127mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X127 is a double-acting tie-rod cylinder with a 100 mm bore and 127 mm stroke, generating a push force of 3927 N at 0.5 MPa (up to 7068 N at 0.9 MPa). The 25 mm diameter piston rod and 29 mm adjustable air cushion provide robust linear actuation for medium-to-heavy industrial tasks.
This model features a 188 mm body length and PT1/2 port threads. With a maximum standard stroke of 1500 mm, this 127 mm stroke unit is a standard, in-stock configuration. The TPU seals ensure reliable operation in standard temperature environments from -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X127 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 127 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×127 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily raises or stops heavy pallets on conveyor lines, providing a decisive 127 mm transfer stroke for diverting loads.
Ideal for heavy-duty clamping fixtures and small assembly presses, where the 7068 N maximum thrust at 0.9 MPa holds large workpieces securely during machining or welding.
Use this cylinder to eject heavy stamped or molded parts from dies. The 29 mm cushion absorbs impact energy effectively, protecting the tooling at the end of the 127 mm stroke.
Choose the SC100X127 when your application needs roughly 4000 N of force at typical shop air. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher force requirements, the 125 mm bore delivers 6136 N at the same pressure.
For a direct replacement, match five key points: 100 mm bore, 127 mm stroke, PT1/2 port thread, the specific mounting accessory (this is a basic body, so no bracket is included), and the absence of a magnet. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
This specific model code does not include the -S suffix, so it does not have a built-in magnet. To use CMSG or DMSG sensors, you would need the SC100X127-S version, which has a magnetized piston for external sensor mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.