
The AirTAC SC100 Standard Cylinder SC100X1330 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1330mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1330 is a double-acting single-rod pneumatic cylinder with a 100 mm bore and an extended 1330 mm stroke. Operating at 0.5 MPa, it generates 3927 N of push force, scaling up to 7068 N at 0.9 MPa, making it suitable for heavy linear actuation tasks.
This non-standard stroke model features a 25 mm diameter piston rod, PT1/2 port threads, and a 29 mm adjustable air cushion. The body length A is 188 mm, giving a total extended length of approximately 1518 mm. As a tie-rod cylinder, it is not an ISO 15552 profile unit, but its robust construction ensures dependable performance in industrial environments.
| Model | Airtac SC100 Standard Cylinder SC100X1330 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1330 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1330 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Ideal for pushing heavy pallets or large boxes off a conveyor line where a 1330 mm reach is required, leveraging 3927 N of force at standard shop air pressure.
Provides powerful, controlled clamping for large weldments or structural assemblies, with the adjustable cushion softening the end-of-stroke impact for consistent part quality.
Transfers large sheet metal blanks into a stamping press. The 7068 N thrust at 0.9 MPa ensures reliable movement of heavy loads, while the long stroke bridges a wide gap.
For applications requiring slightly less force, consider stepping down to the 80 mm bore (2513 N at 0.5 MPa). If you need even higher thrust, the 125 mm bore model provides 6136 N at the same pressure. Always match the bore, stroke, PT port thread, and mounting when replacing an existing cylinder.
Given the 1330 mm stroke, the 25 mm rod is susceptible to bending under side loads. It is critical to use an external guide or a guided cylinder assembly to protect the rod bearing and seals from premature wear. For replacement, ensure the new unit matches the bore, stroke, PT1/2 port, basic mount, and non-magnetic piston configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.7 MPa, the push force is 5497 N. The maximum operating pressure of 1.0 MPa yields a theoretical push force of 801 kgf. At 0.5 MPa, the push force is 3927 N.
No, the 1330 mm stroke is non-standard for a 100 mm bore, where the maximum standard stroke is 1500 mm. For such a long stroke, you must use an external guide rail or rod support to prevent the 25 mm rod from bending under side load, which would otherwise damage the piston rod bearing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.