
The AirTAC SC100 Standard Cylinder SC100X140CB is a genuine double-acting standard air cylinder with a Ø100mm bore and 140mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X140CB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, built on a robust tie-rod design with a 100 mm bore and 140 mm stroke. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide reliable deceleration, while the rear double clevis (CB) mount allows the cylinder to pivot freely during operation.
This configuration uses the F-SC100CB rear fork mount for articulated mounting, ideal for applications where the cylinder body needs to swing. With a body length of 188 mm, the total extended length reaches 328 mm, and the PT1/2 port threads ensure straightforward pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X140CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The rear clevis mount handles the pivoting motion of harvester header lifts and chute deflectors, where the 3927 N force at 0.5 MPa moves heavy crop-handling mechanisms reliably.
Pivots a bin or hopper through its dump cycle. The double clevis absorbs the angular misalignment as the container tilts, and the 25 mm rod resists bending under shifting loads.
Articulates a heavy clamp arm in a weld cell. The CB mount lets the cylinder swing clear for part loading, while the 29 mm cushion softens the clamp impact on each cycle.
For higher force requirements, stepping up to the SC125 bore provides 6136 N of push force at 0.5 MPa. If space is constrained, the SC80 bore offers 2513 N at the same pressure. The 140 mm stroke is well within the 1500 mm maximum standard stroke for this bore, so no special stroke considerations apply.
When replacing this cylinder, match five key points: 100 mm bore, 140 mm stroke, PT1/2 port thread, the CB rear double clevis mounting (F-SC100CB), and the absence of a magnet. This ensures dimensional and functional interchangeability with an existing AirTAC SC tie-rod unit.
Quick checklist
At the standard 0.5 MPa operating pressure, this cylinder provides 3927 N pushing force and 3681 N pulling force. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X140CB is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is lost or the directional valve is centered, the piston will drift. For load holding, add a pilot-operated check valve or an external mechanical rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.