
The AirTAC SC100 Standard Cylinder SC100X140STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 140mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X140STC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and 140 mm stroke, this tie-rod actuator suits medium-stroke clamping and pressing tasks where a trunnion pivot is required.
This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and the TC centre trunnion mount (supplied with TCM1 bracket, part code F-SC100TC) for swinging loads. The 25 mm piston rod, PT1/2 ports, and 29 mm adjustable air cushion provide reliable deceleration. Total extended body length is approximately 328 mm (body length A 188 mm + stroke).
| Model | Airtac SC100 Standard Cylinder SC100X140STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa and trunnion mount allow this cylinder to pivot a diverter gate on a packaging line, handling medium-weight parcels reliably.
With a 140 mm stroke and magnetic piston sensing, this cylinder confirms clamp position in automated welding cells, ensuring consistent part alignment.
The robust tie-rod design and centre trunnion pivot suit the dusty conditions of farm machinery, actuating chute deflectors or hopper doors with 7068 N of force at 0.9 MPa.
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa; for lower force, the SC80 bore provides 2513 N. The 140 mm stroke is well within the 1500 mm maximum standard stroke for this bore. This cylinder includes a centre trunnion mount for pivoting motion—ensure the mounting pins are aligned to avoid binding.
For replacement, match these five points exactly: 100 mm bore, 140 mm stroke, PT port thread, TC centre trunnion mounting (with TCM1 bracket), and the built-in magnet (-S) for sensor compatibility. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X140STC indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.