
The AirTAC SC100 Standard Cylinder SC100X145FA is a genuine double-acting standard air cylinder with a Ø100mm bore and 145mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X145FA is a double-acting pneumatic cylinder with a 100 mm bore and 145 mm stroke, factory-assembled with an FA front rectangular flange for direct panel mounting. At 0.5 MPa it generates 3927 N of push force, while at the maximum operating pressure of 0.9 MPa the thrust reaches 7068 N, placing it in a high-force class suitable for pressing, clamping, and heavy actuation tasks.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT1/2 port connections. The 29 mm adjustable air cushion at each end decelerates the piston smoothly, reducing end-of-stroke impact. The body length A is 188 mm, giving a total extended length of approximately 333 mm for this 145 mm stroke configuration.
| Model | Airtac SC100 Standard Cylinder SC100X145FA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at standard line pressure is ideal for raising or stopping heavy pallets on conveyor lines, where the front flange mount allows rigid attachment to the machine frame.
With 7068 N of force available at 0.9 MPa, this cylinder excels in pneumatic press fixtures and welding jigs that demand high clamping pressure to hold large workpieces securely.
The 100 mm bore provides the sustained force needed for sheet metal bending or composite forming operations, where the adjustable cushion protects tooling by softening the stroke-end impact.
Choose the SC100 bore when your application needs between roughly 3927 N (SC100 at 0.5 MPa) and 7068 N (at 0.9 MPa) of push force. If your force requirement is lower, stepping down to the SC80 bore delivers 2513 N at 0.5 MPa in a lighter, more compact package. For higher forces, the SC125 bore provides 6136 N at 0.5 MPa.
To ensure a correct replacement, match five key points: 100 mm bore, 145 mm stroke, PT1/2 port thread, FA front flange mounting (accessory F-SC100FA), and the absence of a built-in magnet. The SC is a tie-rod cylinder with a shorter body than an ISO 15552 profile cylinder, so dimensional interchangeability is limited to another AirTAC SC100 of the same configuration.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100 is a double-acting cylinder and does not lock or hold position when air pressure is exhausted or the directional valve is centered. If load holding is required in a power-off or emergency-stop condition, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.