
The AirTAC SC100 Standard Cylinder SC100X15 is a genuine double-acting standard air cylinder with a Ø100mm bore and 15mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X15 is a compact-stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a substantial 3927 N of push force at just 0.5 MPa. Its 100 mm bore and short 15 mm stroke make it ideal for clamping, ejecting, or positioning tasks where a high force is needed in a very limited linear travel.
Built with a 25 mm diameter piston rod and M20x1.5 rod thread, this cylinder provides robust guidance for short-throw applications. The total extended body length is approximately 203 mm, and it features PT1/2 ports with an adjustable air cushion to soften end-of-stroke impact.
| Model | Airtac SC100 Standard Cylinder SC100X15 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa makes this cylinder perfect for pneumatic clamping fixtures in woodworking or metal fabrication, securing workpieces with minimal stroke.
Ideal for part ejection from injection molds or stamping dies, where a powerful, brief push is required to separate components without excessive travel.
Use the SC100X15 to actuate heavy diverter gates on conveyor systems, providing a quick, high-force 15 mm shift to redirect packages or bulk materials.
For applications requiring slightly less force, consider stepping down to the 80 mm bore (2513 N at 0.5 MPa). If a longer stroke is needed, the SC100 bore supports standard strokes up to 1500 mm. When replacing an existing cylinder, ensure a 5-point match: 100 mm bore, 15 mm stroke, PT1/2 port thread, basic mounting (no brackets), and no magnet.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 3927 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X15 is a double-acting cylinder and will not hold its position if air pressure is lost or the valve is centered. For load holding without live pressure, you must add an external rod brake or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.