Airtac SC100 Standard Cylinder SC100X152SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X152SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 152mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke152 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X152SCB
The SC100X152SCB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 152 mm stroke suit medium-stroke clamping and pressing tasks where a compact tie-rod body is preferred.
This model includes a built-in magnet for CMSG/DMSG/EMSG position sensors and a rear double clevis (CB) mount for pivoting attachment. The 25 mm diameter rod and 29 mm air cushion provide reliable deceleration, while the PT1/2 port and M20x1.5 rod thread ensure straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X152SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X152SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 152 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X152SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×152 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X152SCB Is Used
Clamping & Fixturing
The 3927 N force at 0.5 MPa securely holds workpieces in CNC machining centres and welding jigs, with the CB clevis allowing the cylinder to pivot as the clamp engages.
Part Ejection
Delivers a firm push to eject parts from conveyor lines or stamping dies. The built-in magnet enables end-of-stroke sensing to confirm ejection before the next cycle.
Press-Fit Assembly
Generates up to 7068 N at 0.9 MPa for pressing bearings, bushings, or pins into housings. The double clevis mount handles the slight arc motion common in toggle-press linkages.
Is the Airtac SC100 Standard Cylinder SC100X152SCB the Right Cylinder?
Choose the SC100 when your load requires roughly 4000 N at standard line pressure; for lighter loads around 2500 N, step down to the SC80 bore. This 152 mm stroke is within the standard range, but ensure the rod is not subjected to side loads—if lateral forces are present, add an external guide or switch to a guided cylinder.
For a direct replacement, match five points: 100 mm bore, 152 mm stroke, PT port thread, CB rear double clevis mounting (F-SC100CB), and the -S magnet option for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X152SCB FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At 0.7 MPa, push rises to 5497 N, and at the maximum operating pressure of 0.9 MPa, it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100 is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centred. For load holding without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X152SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.