Airtac SC100 Standard Cylinder SC100X155S
The AirTAC Airtac SC100 Standard Cylinder SC100X155S is a genuine double-acting standard air cylinder with a Ø100mm bore and 155mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke155 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X155S
The SC100X155S is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for mid-stroke positioning tasks.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped directly onto the barrel for reliable end-of-stroke or mid-stroke position sensing without external brackets.
Airtac SC100 Standard Cylinder SC100X155S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X155S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X155S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X155S Is Used
Material Handling Gates
Operates diverter gates and stops on conveyor lines, with sensor confirmation of gate position via the integrated magnet.
Press-Fit Assembly
Provides 3927 N of push force at standard plant pressure for pressing bushings or bearings into housings with sensor-verified stroke completion.
Palletizer Pushers
Moves boxes or layers onto pallets; the 155 mm stroke suits standard case depths and the magnetic piston enables end-of-stroke detection.
Is the Airtac SC100 Standard Cylinder SC100X155S the Right Cylinder?
For higher force, step up to the SC125 bore (6136 N push at 0.5 MPa); for a lighter, more compact solution, the SC80 bore provides 2513 N at 0.5 MPa. This 155 mm stroke is within the 1500 mm maximum standard stroke for bore 100.
When replacing, match five points: 100 mm bore, 155 mm stroke, PT1/2 port thread, the built-in magnet (-S), and basic mounting. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X155S FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix means a magnet is built into the piston. You can mount CMSG (reed), DMSG, or EMSG (solid-state) sensors directly on the cylinder barrel tie-rods to detect piston position without any modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X155S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.