
The AirTAC SC100 Standard Cylinder SC100X180 is a genuine double-acting standard air cylinder with a Ø100mm bore and 180mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X180 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering a substantial 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and 180 mm stroke, it features a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion (29 mm length) to decelerate end-of-stroke impact.
This cylinder's body length A is 188 mm, making the total extended length approximately 368 mm. It operates on filtered air from 0.15 to 1.0 MPa and uses standard TPU/NBR seals for a temperature range of -20 to +70 °C. The standard PT port thread ensures reliable pneumatic connections for industrial automation tasks.
| Model | Airtac SC100 Standard Cylinder SC100X180 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily actuates heavy-duty diverter gates, pushers, and lift-and-carry mechanisms on packaging and palletizing lines.
Provides robust, controlled force for clamping large workpieces in CNC machining centers, welding jigs, or automotive assembly stations, with adjustable cushioning to protect tooling.
Suitable as a cost-effective actuator for light-duty pressing, stamping, or bending operations, leveraging its 7068 N maximum thrust at 0.9 MPa for consistent forming cycles.
For applications requiring slightly less force, consider stepping down to the 80 mm bore SC80 series, which provides 2513 N at 0.5 MPa. If your load demands more, the SC125 series offers 6136 N at the same pressure. When replacing this cylinder, ensure a 5-point match: 100 mm bore, 180 mm stroke, PT1/2 port thread, basic mounting (no accessory), and no built-in magnet. For strokes over 300 mm on this bore, an external guide is recommended to protect the 25 mm rod from side-load bending.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC tie-rod cylinder with the same 100 mm bore, 180 mm stroke, PT1/2 ports, and basic mounting configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.