
The AirTAC SC100 Standard Cylinder SC100X180SFA is a genuine double-acting standard air cylinder with a Ø100mm bore and 180mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X180SFA is a 100 mm bore, 180 mm stroke double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. Its 25 mm piston rod and 29 mm adjustable air cushion handle end-of-stroke deceleration effectively for mid-range linear tasks.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus an FA front rectangular flange (F-SC100FA) for secure panel mounting. The standard PT1/2 port and TPU seals suit filtered-air systems from -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X180SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa clamps heavy weldments and machining fixtures securely, while the FA flange bolts directly to a vertical bulkhead.
With 180 mm stroke and sensor-ready magnet, this cylinder raises or stops pallets on roller conveyors, giving PLC feedback at both ends of travel.
The front-flange mount simplifies installation on diverter chutes, using the 7068 N peak thrust to shift heavy product flows reliably.
Choose the SC100 when your application needs roughly 3927 N at 0.5 MPa. If you can work with about 2513 N, stepping down to an 80 mm bore saves space and air; for heavier loads near 6136 N, move up to the 125 mm bore. Always match the replacement cylinder on all five points: 100 mm bore, 180 mm stroke, PT1/2 port thread, FA front flange mounting, and the built-in magnet for sensors.
At 180 mm stroke, side-load risk is moderate. For any off-axis force, use an external guide rail or a guided cylinder to protect the rod bearing and seals from premature wear.
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes, if your existing cylinder is an AirTAC SC tie-rod type with 100 mm bore, 180 mm stroke, PT1/2 ports, FA front flange mount, and a magnetic piston. The SC is not an ISO 15552 cylinder, so it will not directly interchange with profile-barrel types.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.