
The AirTAC SC100 Standard Cylinder SC100X186 is a genuine double-acting standard air cylinder with a Ø100mm bore and 186mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X186 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 186 mm stroke. At 0.5 MPa supply pressure it generates 3927 N pushing force and 3681 N on the retract stroke, making it a capable actuator for medium-to-heavy linear tasks where a compact envelope is required.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 ports. The body length A is 188 mm, giving an extended length of approximately 374 mm. Adjustable air cushioning at both ends decelerates the piston across a 29 mm cushion length, protecting end caps from impact damage at speeds up to 800 mm/s.
| Model | Airtac SC100 Standard Cylinder SC100X186 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 186 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×186 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pneumatically raises and lowers pallet stops or transfer arms in conveyor lines, using the 3927 N push force to hold position against moving loads.
Applies controlled clamping pressure in welding jigs and assembly fixtures, where the adjustable cushion prevents impact marks on workpieces.
Opens and closes slide gates on silos and chutes, handling the dust and temperature swings typical of agricultural processing environments.
For applications needing more force, stepping up to the 125 mm bore SC125 series provides 6136 N push at 0.5 MPa. If 3927 N is sufficient but a shorter overall length is preferred, the 80 mm bore SC80 delivers 2513 N push at 0.5 MPa in a lighter package. Always match replacement cylinders on five points: bore, stroke, PT port thread, basic mounting, and the absence of a magnet on this -S-free code.
At 186 mm stroke the 25 mm rod is well supported inside standard bearings, but any significant side load should be managed with an external guide rail or rod-alignment coupler to prevent premature bushing wear and rod bending.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the cylinder delivers 3927 N extending (push) and 3681 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X186 is a double-acting cylinder that requires continuous air pressure to maintain position. If pressure is exhausted or the directional valve centers, the piston can drift. For load holding without live pressure, add a pilot-operated check valve or an external rod brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.