
The AirTAC SC100 Standard Cylinder SC100X190 is a genuine double-acting standard air cylinder with a Ø100mm bore and 190mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X190 is a double-acting tie-rod cylinder that generates 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 190 mm stroke and a 25 mm diameter piston rod, this model suits medium-reach clamping, pressing, and material-handling tasks where robust force is needed in a compact footprint.
The body length A measures 188 mm, giving a total extended length of approximately 378 mm. The adjustable pneumatic cushion (29 mm length) decelerates the piston smoothly at each end, reducing impact noise and wear. PT1/2 ports and an M20x1.5 rod thread ensure straightforward plumbing and tooling attachment.
| Model | Airtac SC100 Standard Cylinder SC100X190 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Delivers 3927 N at 0.5 MPa to reliably stop and position heavy pallets on roller conveyors without excessive shock.
The 190 mm stroke provides ample clearance for inserting bearings or bushings, with up to 7068 N of force available for final seating.
Ideal for welding fixtures and CNC jigs where the 25 mm rod resists deflection and the adjustable cushion protects the fixture from impact.
For applications requiring slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa. If the 190 mm stroke is near the limit of your side-load tolerance, note that the unsupported 25 mm rod can experience bending under high radial loads—consider an external linear guide or a guided cylinder for strokes exceeding 300 mm. To replace this model, match five points exactly: 100 mm bore, 190 mm stroke, PT1/2 ports, the basic (no bracket) mounting configuration, and the absence of a magnet.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa operating pressure, the SC100X190 produces 5497 N of push force on the outstroke and 3681 N of pull force on the retract stroke. The theoretical maximum push force at 1.0 MPa is 801 kgf.
No, this is a double-acting cylinder and will not hold position if air pressure is exhausted or the directional valve is centered. The adjustable air cushion only decelerates the piston at stroke end. For load holding without live pressure, you must add a pilot-operated check valve or an external rod brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.