
The AirTAC SC100 Standard Cylinder SC100X192S is a genuine double-acting standard air cylinder with a Ø100mm bore and 192mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X192S delivers a robust 3927 N of push force at 0.5 MPa, making it a strong mid-range actuator for industrial automation. Its 25 mm diameter piston rod and 29 mm adjustable air cushion handle end-of-stroke deceleration smoothly, while the built-in magnet allows direct mounting of CMSG, DMSG, or EMSG sensors for reliable position feedback.
With a 192 mm stroke, this double-acting cylinder suits applications needing a moderate linear throw. The body length A is 188 mm, giving a total extended length of approximately 380 mm. It uses PT1/2 ports and an M20x1.5 rod thread, standard for the 100 mm bore SC series.
| Model | Airtac SC100 Standard Cylinder SC100X192S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 192 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×192 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the push force to divert packages or products on a conveyor line, with sensor confirmation of extend/retract position.
Delivers consistent clamping pressure for machining or assembly fixtures, with magnetic piston sensing for cycle start interlock.
Acts as a feed or ejection cylinder in light press operations, leveraging 3927 N of force at standard shop air pressure.
For higher force, step up to the SC125 (6136 N push at 0.5 MPa); for a lighter, more compact actuator, the SC80 provides 2513 N. The SC100X192S is a direct replacement for any AirTAC SC100 cylinder of the same bore, stroke, PT port thread, and magnet configuration. Always match bore, stroke, port type, mounting accessory, and magnet option when replacing.
At 192 mm, this stroke is well within the standard range, but if side loads are present, ensure the rod is externally guided or consider a guided cylinder to prevent rod bearing wear and bending.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the barrel for non-contact position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.