
The AirTAC SC100 Standard Cylinder SC100X197 is a genuine double-acting standard air cylinder with a Ø100mm bore and 197mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X197 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, pairing a 100 mm bore with a 197 mm stroke. It generates 3927 N of push force at 0.5 MPa and reaches 7068 N at the maximum operating pressure of 0.9 MPa, making it a strong actuator for medium-to-heavy industrial tasks.
This model uses a 25 mm diameter piston rod with an M20x1.5 male rod thread and PT1/2 pneumatic ports. The body length A is 188 mm, giving a total extended length of approximately 385 mm. An adjustable air cushion (29 mm length) decelerates the piston at both ends of the stroke to reduce impact and noise.
| Model | Airtac SC100 Standard Cylinder SC100X197 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 197 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×197 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Applies a controlled 3927 N clamping force at 0.5 MPa to hold heavy workpieces on CNC machining centres and welding fixtures.
Provides a 197 mm stroke for lifting or pushing components between conveyor lines, with adjustable cushioning to protect parts during high-speed transfer.
Delivers up to 7068 N of thrust at 0.9 MPa for pressing bearings, riveting, or assembling heavy components in a compact station.
Choose the SC100X197 when your application needs around 4000 N of force at standard shop air pressure. If you require more force, stepping up to the SC125 bore provides 6136 N at 0.5 MPa; for a lighter, more compact solution, the SC80 bore delivers 2513 N. Ensure your directional valve and flow controls are sized for the PT1/2 ports.
For a direct replacement, match five key points: 100 mm bore, 197 mm stroke, PT port thread, basic (no bracket) mounting, and no magnet. This SC cylinder is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders. At this stroke length, the rod bearing is well-supported, but avoid applying direct side loads to the rod end without an external guide.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC100 tie-rod cylinder matching the 197 mm stroke, PT1/2 ports, and basic mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.