verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X200CA

The AirTAC SC100 Standard Cylinder SC100X200CA is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke200 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$136.29 $143.79Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X200CA

The AirTAC SC100X200CA is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 200 mm stroke is paired with a 25 mm diameter piston rod and a rear single clevis mount for pivoting applications.

This model features PT1/2 ports and an adjustable air cushion of 29 mm to decelerate end-of-stroke loads. The CA rear clevis (part F-SC100CA) allows the cylinder body to pivot, making it suitable for clamping and tensioning fixtures.

Airtac SC100 Standard Cylinder SC100X200CA Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X200CA
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X200CA

SCStandard tie-rod cylinder series.
100Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X200CA Is Used

precision_manufacturing

Clamping Fixtures

The rear clevis mount allows the cylinder to pivot, applying 3927 N of clamping force at 0.5 MPa to hold workpieces during machining or welding.

conveyor_belt

Part Diverter Gates

Use the SC100X200CA to pivot a diverter arm on a conveyor line, sorting packages with a robust 200 mm stroke actuation.

engineering

Tensioning Mechanisms

Ideal for belt or chain tensioners where the cylinder body must swing, providing consistent 7068 N peak force at 0.9 MPa.

Is the Airtac SC100 Standard Cylinder SC100X200CA the Right Cylinder?

Choose the SC100 bore when your application needs roughly 4000 N of force at standard plant pressure. If you can accept a smaller footprint, the SC80 bore provides 2513 N at 0.5 MPa, while the SC125 steps up to 6136 N. For this 200 mm stroke, rod bending is not a primary concern, but always align the clevis pin to avoid side loads.

To replace an existing cylinder, match five points: 100 mm bore, 200 mm stroke, PT port thread, CA rear single clevis mounting, and confirm no magnet sensor is required (this model has no built-in magnet).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X200CA FAQ

At 0.5 MPa it delivers 3927 N, at 0.7 MPa it reaches 5497 N, and at the maximum operating pressure of 0.9 MPa it provides 7068 N of push force.

Yes, the CA suffix designates a rear single clevis mount (F-SC100CA), which allows the cylinder body to pivot around a fixed pin. Ensure the pin is aligned and the rod end is also free to pivot to prevent side loading.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X200CA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X200CA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.