
The AirTAC SC100 Standard Cylinder SC100X200SFA is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X200SFA is a double-acting pneumatic cylinder delivering a substantial 3927 N push force at 0.5 MPa (up to 7068 N at 0.9 MPa), making it a robust choice for heavy linear actuation. This model features a 25 mm diameter piston rod, an adjustable air cushion of 29 mm at each end for smooth deceleration, and a 200 mm stroke that fits within its 1500 mm maximum standard range.
Supplied with a built-in magnet (-S) and a front rectangular flange (FA), the cylinder is ready for sensor mounting and rigid panel attachment. The magnet allows CMSG/DMSG/EMSG sensors to be clamped directly onto the tie-rod barrel for precise position feedback, while the F-SC100FA flange provides a secure end-face mounting solution.
| Model | Airtac SC100 Standard Cylinder SC100X200SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The high force output at standard shop air pressure allows this cylinder to power heavy-duty clamps and work-holding fixtures in machining centers, ensuring parts remain immobile during milling or drilling operations.
Ideal for diverting heavy packages or defective products on high-speed conveyor lines. The front flange mount and magnetic piston enable easy integration and end-of-stroke confirmation for automated sortation.
Delivers up to 7068 N of push force at 0.9 MPa for pressing bearings, bushings, or rivets into place. The adjustable cushioning protects tooling and parts from impact damage during high-cycle assembly.
For applications requiring slightly less force, consider stepping down to the 80 mm bore SC80 series, which provides 2513 N at 0.5 MPa. This SC100 model uses a PT1/2 port thread and a M20x1.5 rod thread. When replacing an existing cylinder, ensure a 5-point match: 100 mm bore, 200 mm stroke, PT port thread, front flange FA mounting, and the built-in magnet (-S) for sensor compatibility. For strokes of 300 mm or longer, evaluate side-load conditions and consider an external guide or a guided cylinder to protect the rod bearing from bending moments.
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is physically shorter than a comparable ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement for another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT ports, FA front flange, and magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.