
The AirTAC SC100 Standard Cylinder SC100X205CB is a genuine double-acting standard air cylinder with a Ø100mm bore and 205mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X205CB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a robust actuator for medium-heavy linear tasks. Its 100 mm bore houses a 25 mm diameter piston rod with a 29 mm adjustable air cushion at each end, and the 205 mm stroke brings the total extended body length to approximately 393 mm.
This model is configured with a rear double clevis (CB) mount, part code F-SC100CB, which allows the cylinder to pivot during operation—ideal for articulated linkages. It uses standard PT1/2 ports and operates on filtered air within a -20 to +70 °C range with its default TPU seals.
| Model | Airtac SC100 Standard Cylinder SC100X205CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 205 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×205 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Operates chute diverters or hopper gates on harvesters and conveyors, providing the 3927 N force needed to move heavy grain loads with the pivoting freedom of the rear clevis mount.
Delivers up to 7068 N of clamping force at 0.9 MPa for holding workpieces during welding or assembly, with the CB clevis allowing the cylinder to align with the clamp arm's arc.
Drives a heavy-duty sorting gate on a material handling line, using the double clevis mount for smooth angular motion and the adjustable cushion to reduce end-of-stroke impact.
Choose the SC100 bore when your application needs between 3927 N and 7068 N of force; stepping down to an SC80 bore provides 2513 N at 0.5 MPa for lighter, faster cycles. For this 205 mm stroke, ensure the load is guided and side forces are minimized to protect the rod bearing, especially in a pivoting clevis setup. As a direct replacement, match the 100 mm bore, 205 mm stroke, PT1/2 ports, rear double clevis (CB) mounting, and confirm if a magnet sensor option is needed.
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
This specific model includes a rear double clevis (CB) mount. For a direct fit, the replacement must match the 100 mm bore, 205 mm stroke, PT1/2 ports, and the CB mounting style. If your machine uses a foot or flange mount, you would need the basic model plus the corresponding mounting kit (e.g., F-SC100LB for foot mounting).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.