
The AirTAC SC100 Standard Cylinder SC100X210S is a genuine double-acting standard air cylinder with a Ø100mm bore and 210mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X210S is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). With a 210 mm stroke and 25 mm diameter piston rod, it suits medium-reach clamping and pressing tasks where sensor feedback is required.
A built-in magnet (denoted by the -S suffix) allows CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly onto the barrel for end-of-stroke or mid-position detection. The adjustable air cushion at each end decelerates the piston smoothly, and the PT1/2 port threads provide reliable air connections.
| Model | Airtac SC100 Standard Cylinder SC100X210S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 210 mm stroke and built-in magnet make it ideal for pick-and-place or shuttle units where sensors confirm extended and retracted positions to the PLC.
With 7068 N of force available at 0.9 MPa, this cylinder securely clamps large weldments or assemblies during fabrication, while the cushion reduces impact noise.
The consistent force output and magnetic piston sensing suit press-fit operations where insertion depth is monitored via external barrel-mounted sensors.
Choose the SC100 bore when your application needs roughly 4000 N of push force at standard shop air pressure. If you can accept less force, stepping down to an SC80 (2513 N at 0.5 MPa) saves space and weight; for heavier loads, the SC125 (6136 N at 0.5 MPa) offers a significant force increase. The 210 mm stroke is within the standard range for this bore.
For replacement, match five points: 100 mm bore, 210 mm stroke, PT port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration. This cylinder is a tie-rod design, not an ISO 15552 profile, so it is dimensionally shorter and only directly interchangeable with another AirTAC SC100 of the same stroke and options.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 3927 N. At 0.7 MPa it rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston. You can use AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors clamped directly to the barrel's tie-rod slots to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.