
The AirTAC SC100 Standard Cylinder SC100X210STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 210mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X210STC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 210 mm stroke suit medium-stroke clamping and pressing tasks where a 25 mm diameter rod provides robust column strength.
This configuration includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus a centre trunnion mount (TC) with the TCM1 bracket for pivoting applications. The adjustable air cushion (29 mm) decelerates the piston smoothly, and the PT1/2 ports ensure straightforward pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X210STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The centre trunnion mount allows the cylinder body to pivot, making it ideal for clamping and releasing weldments in automated welding cells where the 3927 N force securely holds parts.
With the TCM1 trunnion bracket, this cylinder actuates pivoting gates on conveyor lines, using its 210 mm stroke to reliably divert packages or components between lanes.
Generating up to 7068 N at 0.9 MPa, the SC100X210STC powers light assembly presses for bearing insertion or riveting, with magnetic sensors confirming full extension and retraction.
For higher force, step up to the SC125 bore (6136 N at 0.5 MPa); for a lighter, faster actuator, the SC80 bore offers 2513 N. The 210 mm stroke is within the 1500 mm maximum standard stroke for this bore. When replacing, match five points: 100 mm bore, 210 mm stroke, PT port thread, centre trunnion (TC) mounting, and the built-in magnet (-S) for sensor compatibility.
At this stroke length, avoid unsupported side loads on the 25 mm rod. For applications with lateral forces, use an external linear guide or consider a guided cylinder to prevent rod bending and premature bearing wear.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.5 MPa, it produces 3927 N extending and 3681 N retracting. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder that is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with matching stroke, PT ports, and centre trunnion mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.