Airtac SC100 Standard Cylinder SC100X232SN
The AirTAC Airtac SC100 Standard Cylinder SC100X232SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 232mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke232 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X232SN
The AirTAC SC100X232SN is a double-acting single-rod tie-rod cylinder that generates 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and 232 mm stroke, this model is sized for demanding linear automation tasks where consistent thrust is critical. The rod diameter is 25 mm, and the PT1/2 port supplies ample flow for rapid cycling.
This variant includes a built-in magnet (-S suffix) for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel, enabling precise end-of-stroke or mid-stroke position feedback. The N suffix specifies NBR (nitrile) seals, making it a practical choice for general industrial environments operating within the standard -20 to +70 °C temperature range.
Airtac SC100 Standard Cylinder SC100X232SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X232SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 232 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X232SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×232 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X232SN Is Used
Pallet Stop & Lift Gates
Provides the 3927 N push force needed to raise or stop heavy pallets on conveyor lines, with magnetic sensors confirming the gate position for interlocked safety logic.
Heavy-Duty Clamping Fixtures
Delivers 7068 N of clamping force at 0.9 MPa for securing large weldments or castings. The NBR seals offer reliable performance in typical shop air conditions.
Baler & Compactor Ejection
Ejects compacted material bales with a robust 232 mm stroke. The built-in magnet allows sensors to verify full extension and retraction, ensuring complete cycle counts.
Is the Airtac SC100 Standard Cylinder SC100X232SN the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while stepping up to the 125 mm bore offers 6136 N. With a 232 mm stroke, this cylinder operates well within the 1500 mm maximum standard stroke for the 100 mm bore, so rod bending is not a primary concern, but always avoid direct side loading. To ensure a correct replacement, match five points: 100 mm bore, 232 mm stroke, PT port thread, the built-in magnet (-S), and the basic (no-bracket) mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X232SN FAQ
At 0.7 MPa operating pressure, the theoretical push force is 5497 N. The maximum push force at the 0.9 MPa operating limit is 7068 N.
Yes. The -S suffix in the model code indicates a built-in magnet on the piston. You can clamp compatible AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X232SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.