Airtac SC100 Standard Cylinder SC100X480
The AirTAC Airtac SC100 Standard Cylinder SC100X480 is a genuine double-acting standard air cylinder with a Ø100mm bore and 480mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke480 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X480
The AirTAC SC100X480 is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), making it a robust choice for heavy linear actuation tasks. With a 100 mm bore and a 480 mm stroke, this tie-rod cylinder features a 25 mm diameter piston rod, PT1/2 ports, and a 29 mm adjustable air cushion at each end to decelerate the load smoothly.
This model is built with the standard TPU/NBR seals for reliable operation in temperatures from -20 to +70 °C. The total extended body length is approximately 668 mm (188 mm body length A plus 480 mm stroke), fitting into machine layouts where a compact yet powerful pneumatic cylinder is required.
Airtac SC100 Standard Cylinder SC100X480 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X480 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 480 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X480
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×480 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X480 Is Used
Pallet Transfer Systems
Provides the high force needed to push or lift heavy pallets onto conveyor lines, with the 480 mm stroke covering standard pallet transfer distances.
Heavy-Duty Clamping Fixtures
Delivers up to 7068 N of clamping force at 0.9 MPa to secure large workpieces during machining or welding, with adjustable cushioning to prevent part damage.
Industrial Press Feed Mechanisms
Actuates material handling arms in stamping presses, reliably moving heavy steel sheets or components through a 480 mm feed stroke.
Is the Airtac SC100 Standard Cylinder SC100X480 the Right Cylinder?
Select the SC100X480 when your application demands a push force around 3927 N at standard plant pressure. If you need a lighter, more compact actuator, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa. For higher force requirements, stepping up to the 125 mm bore SC125 series offers 6136 N at the same pressure.
At a 480 mm stroke, ensure the rod is protected from significant side loading. Long unsupported strokes on a 25 mm rod can be susceptible to bending under lateral forces; use an external linear guide or a guided cylinder assembly to absorb the load and protect the rod bearings. For a direct replacement, match the 100 mm bore, 480 mm stroke, PT1/2 port thread, basic mounting, and the absence of a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X480 FAQ
At 0.7 MPa operating pressure, the SC100X480 produces a theoretical push force of 5497 N and a pull force of 3681 N. The maximum push force at the 0.9 MPa operating limit is 7068 N.
This specific SC100X480 model does not include the built-in magnet option. To mount CMSG or DMSG sensors directly on the barrel for end-of-stroke detection, you would need to order the variant with the -S suffix, such as SC100X480-S.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X480
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.