Airtac SC100 Standard Cylinder SC100X500
The AirTAC Airtac SC100 Standard Cylinder SC100X500 is a genuine double-acting standard air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X500
The SC100X500 is a robust double-acting tie-rod cylinder generating 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and 500 mm stroke, this model is built for demanding linear applications requiring substantial force over a mid-range travel distance.
This cylinder features a 25 mm diameter piston rod with an M20x1.5 rod thread and PT1/2 ports. The adjustable pneumatic cushion is 29 mm long, effectively decelerating the piston near the stroke end to reduce impact. The body length A is 188 mm, resulting in a total extended length of approximately 688 mm.
Airtac SC100 Standard Cylinder SC100X500 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X500 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X500
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X500 Is Used
Pallet Stop & Transfer
Deploys a 500 mm stroke to raise heavy pallet stops or transfer carriages in conveyor systems, leveraging 3927 N of push force at 0.5 MPa for reliable material handling.
Heavy-Duty Clamping
Provides up to 7068 N of clamping force at 0.9 MPa for securing large workpieces during welding, machining, or assembly, with an adjustable cushion to soften the clamp engagement.
Baler & Compactor Ejection
Drives a 500 mm ejection ram in recycling balers or compactors, using the cylinder's high force output to push dense material bales onto an outfeed conveyor.
Is the Airtac SC100 Standard Cylinder SC100X500 the Right Cylinder?
Select the SC100 when your application needs roughly 4000 N of force at standard plant pressure. If you require a more compact solution with less force, consider stepping down to the SC80 bore, which provides 2513 N at 0.5 MPa. For a 500 mm stroke, ensure the load is guided; side forces on the unsupported 25 mm rod can cause bending and premature seal wear. Use external linear guides or a guided cylinder if side loads are present.
For a direct replacement, match these five points: 100 mm bore, 500 mm stroke, PT port thread, basic mounting (no factory-fitted brackets), and the absence of a built-in magnet. This ensures dimensional and functional interchangeability with an existing AirTAC SC100X500 tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X500 FAQ
At 0.7 MPa operating pressure, the SC100X500 double-acting cylinder generates a push force of 5497 Newtons. The theoretical maximum force at 1.0 MPa is 801 kgf, though the maximum rated operating pressure is 1.0 MPa.
No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than a comparable ISO 15552 profile cylinder. It is dimensionally interchangeable only with another AirTAC SC tie-rod cylinder of the same bore, stroke, port thread, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X500
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.