Airtac SC100 Standard Cylinder SC100X500SH
The AirTAC Airtac SC100 Standard Cylinder SC100X500SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X500SH
The AirTAC SC100X500SH is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 500 mm stroke suit medium-to-heavy pneumatic linear motion, with a 25 mm piston rod and PT1/2 ports for reliable air flow.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and Viton (FKM) seals (-H) that extend the operating temperature range to 0–150°C. The adjustable air cushion (29 mm) decelerates the piston smoothly, reducing end-of-stroke impact in high-cycle applications.
Airtac SC100 Standard Cylinder SC100X500SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X500SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X500SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X500SH Is Used
Hot-Environment Press Actuation
Viton seals allow the SC100X500SH to operate reliably in ambient temperatures up to 150°C, making it suitable for clamping fixtures near ovens, autoclaves, or heated presses where standard seals would degrade.
Pallet Transfer Systems
With 500 mm of stroke and 3927 N of push force, this cylinder moves heavy pallets or bins between conveyor lanes. The built-in magnet enables end-of-stroke sensing for automated sequencing.
High-Temperature Gate or Diverter
The SC100X500SH actuates material gates or diverters in foundry or glass-handling lines. Viton seals resist heat, while the adjustable cushion protects the cylinder from impact damage during fast cycling.
Is the Airtac SC100 Standard Cylinder SC100X500SH the Right Cylinder?
Choose the SC100 when your load requires around 3927 N at 0.5 MPa; for lighter loads near 2513 N, the SC80 bore may reduce air consumption, while the SC125 bore provides 6136 N for heavier demands. The 500 mm stroke is within the standard range for this bore (max 1500 mm).
For strokes of 300 mm or more, avoid unsupported side loads—long rod extension can cause bending. Use an external guide rail or a guided cylinder if the load is not perfectly axial. When replacing, match bore (100 mm), stroke (500 mm), PT1/2 port thread, the built-in magnet (-S), and Viton seal material to ensure identical fit and sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X500SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, so you can mount CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel for position detection without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X500SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.