Airtac SC100 Standard Cylinder SC100X535S
The AirTAC Airtac SC100 Standard Cylinder SC100X535S is a genuine double-acting standard air cylinder with a Ø100mm bore and 535mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke535 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X535S
The SC100X535S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a robust actuator for demanding linear applications. This model features a 100 mm bore, a 25 mm diameter piston rod with M20x1.5 threads, and PT1/2 ports for straightforward pneumatic connections.
With a non-standard stroke of 535 mm, this cylinder extends beyond the standard 1500 mm maximum for the 100 mm bore series, offering a tailored solution for specific reach requirements. The built-in magnet (suffix -S) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for precise end-of-stroke or mid-stroke position feedback.
Airtac SC100 Standard Cylinder SC100X535S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X535S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 535 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X535S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×535 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X535S Is Used
Material Rejection Gates
Provides the high force and extended reach needed to divert heavy packages or off-spec products on wide conveyor lines, with magnetic sensors confirming gate position.
Heavy-Duty Clamping Fixtures
Delivers up to 7068 N of clamping force at 0.9 MPa for securing large weldments or structural assemblies, where the long stroke accommodates varied part sizes.
Press Feed Mechanisms
Pushes heavy coil stock or sheet metal blanks into stamping presses with 3927 N of force, using the built-in magnet for sensor-based cycle initiation.
Is the Airtac SC100 Standard Cylinder SC100X535S the Right Cylinder?
Select the SC100X535S when your application requires approximately 4000 N of force at standard shop air pressure; for lighter loads around 2500 N, consider stepping down to the 80 mm bore (2513 N at 0.5 MPa). At a 535 mm stroke, the unsupported piston rod is subject to bending moments under side loads; always use an external linear guide or rod-alignment coupler to protect the rod bearing and seals from premature wear. For a direct replacement, match the 100 mm bore, 535 mm stroke, PT1/2 port thread, the built-in magnet (-S) for sensor compatibility, and the basic (footless) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X535S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, making the SC100X535S fully compatible with AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors that clamp directly onto the cylinder's tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X535S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.