Airtac SC100 Standard Cylinder SC100X570
The AirTAC Airtac SC100 Standard Cylinder SC100X570 is a genuine double-acting standard air cylinder with a Ø100mm bore and 570mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke570 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X570
The AirTAC SC100X570 is a double-acting tie-rod cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 570 mm stroke, it uses a rigid 25 mm diameter piston rod and PT1/2 ports for reliable pneumatic connections.
This model features a body length A of 188 mm, resulting in a total extended length of approximately 758 mm. The adjustable air cushion (29 mm length) decelerates the piston smoothly at stroke ends, protecting end caps from impact. Standard TPU seals provide an operating temperature range of -20 to +70 °C, making this genuine AirTAC actuator suitable for general industrial automation tasks.
Airtac SC100 Standard Cylinder SC100X570 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X570 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X570
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X570 Is Used
Pallet Transfer Systems
The 570 mm stroke and 3927 N force at 0.5 MPa efficiently shift heavy pallets between conveyor lanes in material handling lines.
Heavy Part Ejection
Provides the robust push needed to eject large molded or stamped parts from tooling, with the adjustable cushion softening the end-of-stroke impact.
Bulk Material Gate Control
Operates slide gates on large hoppers or chutes, using its high force to reliably open and close against material weight.
Is the Airtac SC100 Standard Cylinder SC100X570 the Right Cylinder?
Choose the SC100X570 when your application requires the 3927 N push force at standard plant pressure. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the 125 mm bore offers 6136 N at the same pressure.
This 570 mm stroke is within the standard range for the 100 mm bore (max 1500 mm). For strokes of this length, ensure the rod is not subjected to significant side loads, as the 25 mm rod can bend under lateral force. Use an external guide or a guided cylinder if side loading is present. When replacing, match the 100 mm bore, 570 mm stroke, PT1/2 port thread, basic mounting, and confirm if a magnet is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X570 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC100 cylinder of the same stroke and port thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X570
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.