Airtac SC100 Standard Cylinder SC100X570S
The AirTAC Airtac SC100 Standard Cylinder SC100X570S is a genuine double-acting standard air cylinder with a Ø100mm bore and 570mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke570 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X570S
The SC100X570S is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. Its 100 mm bore and 570 mm stroke suit medium-to-long linear movements, while the 25 mm diameter rod and 29 mm adjustable air cushion provide smooth end-of-stroke deceleration.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for contactless position sensing. The body length A is 188 mm, giving a total extended length of approximately 758 mm. Ports are PT1/2 with an M20x1.5 rod thread.
Airtac SC100 Standard Cylinder SC100X570S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X570S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 570 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X570S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×570 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X570S Is Used
Material Transfer Gates
Actuates diverter gates on wide conveyor lines, using the 570 mm stroke to fully extend across belt widths. The built-in magnet confirms gate position with barrel-mounted sensors.
Heavy Part Ejection
Pushes large stamped or molded parts off a tooling nest. The 3927 N force at 0.5 MPa overcomes sticky release forces, while the adjustable cushion absorbs impact at the end of the 570 mm travel.
Pallet Layer Pushing
Drives a pusher plate to align or transfer pallet layers in automated storage. The 25 mm rod and tie-rod construction handle repetitive cycling in dusty warehouse environments.
Is the Airtac SC100 Standard Cylinder SC100X570S the Right Cylinder?
For higher force, the SC125 bore steps up to 6136 N at 0.5 MPa; for a lighter, more compact actuator, the SC80 delivers 2513 N. At a 570 mm stroke, ensure the rod is not subjected to side loads—consider an external linear guide or a guided cylinder if the load is not purely axial. When replacing, match five points: 100 mm bore, 570 mm stroke, PT1/2 ports, the built-in magnet for sensor compatibility, and the basic mounting configuration (no attached bracket).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X570S FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N. At 0.7 MPa it reaches 5497 N, and at the maximum operating pressure of 0.9 MPa it delivers 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet around the piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the tie-rod barrel to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X570S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.