Airtac SC100 Standard Cylinder SC100X580TC
The AirTAC Airtac SC100 Standard Cylinder SC100X580TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 580mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke580 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X580TC
The AirTAC SC100X580TC is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. With a 100 mm bore and a 580 mm stroke, this model is built for linear applications that need substantial force over a medium-long travel distance. The 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration, while the PT1/2 port supplies ample airflow for consistent cycling.
This SC100X580TC ships with the factory-installed TC centre trunnion mount and the matching TCM1 bracket (order code F-SC100TC), allowing the cylinder to pivot during operation. The trunnion design handles swinging loads and angular motion, making it a practical choice for clamping fixtures, material handling arms, and process automation where the cylinder body must rotate. The body length A is 188 mm, giving a total extended length of approximately 768 mm.
Airtac SC100 Standard Cylinder SC100X580TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X580TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 580 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X580TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×580 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X580TC Is Used
Material Handling Arms
The 580 mm stroke and pivoting trunnion mount suit lift-and-rotate stations, transferring heavy parts between conveyors with controlled, cushioned motion.
Heavy Clamping Fixtures
Delivers up to 7068 N of clamping force at 0.9 MPa, ideal for welding jigs, assembly presses, and machining fixtures that require a swinging cylinder body.
Process Automation Gates
Operates diverter gates or chutes in bulk handling, using the centre trunnion to accommodate the arc of motion while the adjustable cushion reduces end-of-stroke shock.
Is the Airtac SC100 Standard Cylinder SC100X580TC the Right Cylinder?
Choose the SC100 when your application needs around 3927 N of force at standard plant air pressure—stepping down to an SC80 bore drops push force to 2513 N at 0.5 MPa, while moving up to an SC125 provides 6136 N. For this 580 mm stroke, confirm that the rod is adequately supported against side loads; an external linear guide or rod-alignment coupler is recommended to prevent bending stress on the 25 mm rod and premature bearing wear. When replacing an existing cylinder, match five points: 100 mm bore, 580 mm stroke, PT port thread, TC centre trunnion mounting (F-SC100TC bracket included), and confirm whether a magnet (-S) is required for sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X580TC FAQ
At 0.5 MPa, the theoretical push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The maximum theoretical force at 1.0 MPa is 801 kgf. Always apply a safety factor for real-world dynamic loads.
No. The SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so mounting dimensions and body length are not interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder or an equivalent tie-rod design matching the 100 mm bore, 580 mm stroke, PT1/2 port, and TC centre trunnion mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X580TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.