Airtac SC100 Standard Cylinder SC100X584
The AirTAC Airtac SC100 Standard Cylinder SC100X584 is a genuine double-acting standard air cylinder with a Ø100mm bore and 584mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke584 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X584
The AirTAC SC100X584 is a double-acting tie-rod cylinder with a 100 mm bore and a non-standard 584 mm stroke, built for applications needing extended linear travel from a compact body. At 0.5 MPa, it provides 3927 N push force and 3681 N pull force, rising to 7068 N push at the maximum operating pressure of 0.9 MPa.
This model uses a 25 mm diameter piston rod with an M20x1.5 rod thread and PT1/2 pneumatic ports. The body length A is 188 mm, giving an approximate extended length of 772 mm. It features an adjustable air cushion (29 mm length) to decelerate the piston at stroke end, protecting the end caps from impact.
Airtac SC100 Standard Cylinder SC100X584 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X584 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 584 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X584
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×584 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X584 Is Used
Long-Reach Material Pusher
The 584 mm stroke moves heavy pallets or large components across a roller conveyor with a 3927 N push at standard line pressure, ideal for transverse transfer stations.
Clamp & Fixture Actuation
Provides strong, extended clamping reach for large weldments or composite layup tools, with the adjustable cushion ensuring smooth deceleration of the heavy fixture.
Diverter Gate Operator
Operates a tall diverter gate on a gravity chute or sorting system, using the full 7068 N force at 0.9 MPa to shift heavy product flows reliably.
Is the Airtac SC100 Standard Cylinder SC100X584 the Right Cylinder?
Select the SC100X584 when the 100 mm bore's force class is required but a standard stroke length does not fit the machine layout. For less force, the SC80 bore offers 2513 N push at 0.5 MPa; for more, step to the SC125 bore at 6136 N push at 0.5 MPa. This 584 mm stroke is non-standard and made-to-order.
For a stroke of this length, side loads on the 25 mm rod must be carefully managed. An unsupported rod extended 584 mm is vulnerable to bending under lateral force. Use an external linear guide or a guided cylinder variant to absorb side loads and protect the rod bearing and piston seals. For replacement, match bore (100 mm), stroke (584 mm), PT port thread, basic mounting, and ensure the tie-rod body length is identical.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X584 FAQ
At 0.7 MPa operating pressure, the SC100 cylinder generates a theoretical push force of 5497 N. The pull force on the retract stroke at the same pressure is slightly lower due to the rod area, providing 3681 N at 0.5 MPa.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder of the same stroke. A direct replacement must be another AirTAC SC tie-rod cylinder with a 100 mm bore, 584 mm stroke, PT1/2 ports, and the same mounting configuration to ensure dimensional fit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X584
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.