Airtac SC100 Standard Cylinder SC100X600CB
The AirTAC Airtac SC100 Standard Cylinder SC100X600CB is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600CB
The SC100X600CB is a 100 mm bore, 600 mm stroke double-acting pneumatic cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth end-of-stroke deceleration for medium-to-heavy linear motion tasks.
This configuration includes a rear double clevis (CB) mounting, part F-SC100CB, allowing the cylinder to pivot during operation. The standard PT 1/2 port threads and TPU seals suit general industrial environments from -20 to +70 °C. The body length is 188 mm, giving a total extended length of approximately 788 mm.
Airtac SC100 Standard Cylinder SC100X600CB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600CB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600CB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600CB Is Used
Agricultural Machinery
Operates chute diverters and hopper gates on harvesters and grain handling equipment, where the pivoting CB mount accommodates structural movement and vibration.
Pallet Transfer Systems
Pushes heavy pallets onto cross-conveyors in distribution centers, leveraging 7068 N of force at 0.9 MPa and the 600 mm stroke to bridge transfer gaps.
Wastewater Screen Rakes
Drives the reciprocating rake mechanism on bar screens, with the double clevis mount allowing the cylinder to follow the curved guide path through the channel.
Is the Airtac SC100 Standard Cylinder SC100X600CB the Right Cylinder?
Choose the SC100 when the SC80's 2513 N push at 0.5 MPa is insufficient for the load. For higher force, step up to the SC125 delivering 6136 N at 0.5 MPa. At a 600 mm stroke, ensure the rod is protected from side loads; external guides or a guided cylinder are recommended to prevent rod bending and premature bearing wear.
For drop-in replacement, match five points: 100 mm bore, 600 mm stroke, PT 1/2 ports, rear double clevis (CB) mounting, and no magnet. This SC model is a tie-rod cylinder, not an ISO 15552 profile, so it is dimensionally interchangeable only with another AirTAC SC100 of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600CB FAQ
At 0.7 MPa operating pressure, the SC100X600CB generates 5497 N of push force and 3681 N of pull force. The maximum theoretical force at 1.0 MPa is 801 kgf.
No. The SC100X600CB is a double-acting cylinder and will drift or drop if pressure is lost or the directional valve is centered. For load holding without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600CB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.