Airtac SC100 Standard Cylinder SC100X600SCB
The AirTAC Airtac SC100 Standard Cylinder SC100X600SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600SCB
The AirTAC SC100X600SCB is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 600 mm stroke suit medium-to-long linear moves in clamping, pressing, and material-transfer stations where rear-pivot mounting is needed.
This model includes a built-in magnet (-S) for CMSG/DMSG/EMSG sensors and a rear double clevis mount (CB, accessory F-SC100CB) for pivoting actuation. The 25 mm rod and 29 mm adjustable air cushion provide smooth deceleration, while the PT1/2 ports and TPU seals handle standard -20 to +70 °C compressed-air environments.
Airtac SC100 Standard Cylinder SC100X600SCB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600SCB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600SCB Is Used
Conveyor Diverters
The 600 mm stroke and rear clevis mount allow the SC100X600SCB to pivot a diverter gate or pusher arm across a wide conveyor lane, handling parcels or cartons with 3927 N of push force at standard plant air.
Press-Fit Assembly
With 7068 N of thrust at 0.9 MPa, this cylinder drives press-fit tooling for bearings, bushings, or connectors. The built-in magnet confirms full extension and retraction via CMSG sensors for quality interlocking.
Pallet Stop & Lift
Pivoting from a rear double clevis, the 100 mm bore cylinder lifts or stops heavy pallets on gravity roller conveyors. The adjustable cushion absorbs impact at stroke end, protecting the pallet and cylinder.
Is the Airtac SC100 Standard Cylinder SC100X600SCB the Right Cylinder?
For higher force, step to the SC125 (6136 N at 0.5 MPa); for a lighter load, the SC80 provides 2513 N. At 600 mm stroke, the rod is extended well beyond the 188 mm body length—ensure side loads are minimal or add an external linear guide to prevent rod-bearing bending and premature seal wear.
When replacing, match bore (100 mm), stroke (600 mm), PT thread, CB rear double clevis mount, and the -S magnet. This SC tie-rod cylinder is shorter than an ISO 15552 unit, so dimensional interchangeability is limited to another AirTAC SC of the same configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600SCB FAQ
At 0.5 MPa it delivers 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X600SCB is a double-acting cylinder and will drift or drop if pressure is exhausted or the directional valve is centred. For load holding without live pressure, add a pilot-operated check valve or an external rod brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600SCB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.