Airtac SC100 Standard Cylinder SC100X600SFA
The AirTAC Airtac SC100 Standard Cylinder SC100X600SFA is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600SFA
The SC100X600SFA is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 600 mm stroke, it is well-suited for medium-reach material handling, pressing, or clamping operations where consistent linear force is required.
This model features a 25 mm diameter piston rod with an M20x1.5 knuckle thread and a 29 mm adjustable air cushion at each end to decelerate the load smoothly. The front rectangular flange (FA) provides rigid end-face mounting, and the built-in magnet allows direct attachment of CMSG, DMSG, or EMSG sensors for reliable end-of-stroke detection.
Airtac SC100 Standard Cylinder SC100X600SFA Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600SFA |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600SFA
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600SFA Is Used
Pallet Lifting
Provides a strong 3927 N push at standard shop pressure to raise and lower heavy pallets on a lift table, with sensor feedback confirming full retraction.
Conveyor Diverter
Drives a gate or diverter arm on a wide conveyor line, using the 600 mm stroke to sweep products across belts with controlled deceleration.
Press Fixture Clamping
Applies up to 7068 N of clamping force in a heavy-duty assembly press, with the front flange bolting directly to the fixture plate.
Is the Airtac SC100 Standard Cylinder SC100X600SFA the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while stepping up to the 125 mm bore offers 6136 N. The 600 mm stroke is within the standard range for the 100 mm bore, which extends up to 1500 mm. For strokes of this length, ensure the rod is supported against side loads; an external linear guide or guided cylinder is recommended if the load is not purely axial. When replacing, match the 100 mm bore, 600 mm stroke, PT1/2 port, FA front flange mount, and the -S magnet option to ensure full compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600SFA FAQ
At 0.7 MPa (7 bar), the theoretical push force is 5497 N. The pull force on the return stroke is 3681 N, accounting for the 25 mm rod area.
Yes. The -S suffix denotes a built-in magnet in the piston, making it compatible with AirTAC CMSG, DMSG, and EMSG series reed or solid-state sensors that clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600SFA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.