Airtac SC100 Standard Cylinder SC100X600STC
The AirTAC Airtac SC100 Standard Cylinder SC100X600STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600STC
The AirTAC SC100X600STC is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a powerful actuator for heavy industrial tasks. This model features a 100 mm bore, 600 mm stroke, and a 25 mm diameter piston rod with M20x1.5 male threads, equipped with PT1/2 ports and a 29 mm adjustable air cushion at each end to decelerate the load smoothly.
This specific configuration includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, and a centre trunnion mount (-TC suffix) supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation. With a body length A of 188 mm, the total extended length is approximately 788 mm, and the standard TPU seals provide reliable operation from -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X600STC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600STC Is Used
Conveyor Diverter Gates
The 7068 N max force at 0.9 MPa easily actuates heavy diverter gates on wide conveyor systems, while the centre trunnion mount allows the cylinder body to pivot as the gate swings through its arc.
Heavy Press Guard Doors
Use the 600 mm stroke to fully open or close large safety guard doors on stamping presses. The built-in magnet enables end-of-stroke confirmation via CMSG sensors to interlock with the machine control system.
Bin Tipper Actuation
The centre trunnion pivot and 3927 N force at 0.5 MPa make this cylinder ideal for tipping heavy bins or hoppers. The adjustable cushioning protects the mechanism from shock at the end of the tilt cycle.
Is the Airtac SC100 Standard Cylinder SC100X600STC the Right Cylinder?
Select the SC100 bore when your application needs 3927 N of push force at 0.5 MPa; if you can work with 2513 N, stepping down to an 80 mm bore reduces size and air consumption. For this 600 mm stroke, be cautious of side loads—an unsupported 25 mm rod at full extension can bend under lateral force, so consider an external linear guide or a guided cylinder if the load is not purely axial. To replace an existing cylinder, match five points: 100 mm bore, 600 mm stroke, PT1/2 ports, centre trunnion (TC) mounting with the F-SC100TC bracket, and the built-in magnet for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600STC FAQ
At the standard operating pressure of 0.5 MPa, this 100 mm bore cylinder generates 3927 N pushing force and 3681 N pulling force (the pull is lower due to the 25 mm rod area). At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -TC suffix designates a centre trunnion mount, which is supplied with the TCM1 bracket (part code F-SC100TC). This mounting style allows the cylinder body to pivot around the trunnion pins, making it suitable for applications where the load moves through an arc, such as bin tippers or swiveling clamps.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.