Airtac SC100 Standard Cylinder SC100X600TC
The AirTAC Airtac SC100 Standard Cylinder SC100X600TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 600mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke600 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X600TC
The AirTAC SC100X600TC is a double-acting pneumatic cylinder with a 100 mm bore and 600 mm stroke, factory-supplied with a centre trunnion (TC) mounting for pivoting applications. At 0.5 MPa air pressure it generates 3927 N of push force and 3681 N of pull force, rising to 7068 N push at the 0.9 MPa maximum operating pressure.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 port connections. The integral adjustable air cushion (29 mm length) decelerates the piston smoothly at both ends of the 600 mm stroke. The body length A is 188 mm, giving a total extended length of approximately 788 mm.
Airtac SC100 Standard Cylinder SC100X600TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X600TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X600TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X600TC Is Used
Conveyor Diverter Gates
The 3927 N push force at 0.5 MPa and centre trunnion mount allow the SC100X600TC to pivot heavy diverter gates on packaging and sortation conveyors, smoothly redirecting product flow with adjustable cushion control.
Welding Fixture Clamping
Delivers up to 7068 N of clamping force at 0.9 MPa for holding large weldments. The trunnion mount lets the cylinder swing as the clamp arm articulates, preventing rod side-loading.
Agricultural Implement Positioning
Used to actuate chute deflectors or hopper doors on farming equipment. The 600 mm stroke provides ample travel, while the tie-rod construction handles dusty, high-vibration environments.
Is the Airtac SC100 Standard Cylinder SC100X600TC the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3900 N of push force at standard 0.5 MPa shop air. If you can accept a smaller actuator, stepping down to the SC80 bore provides 2513 N push at 0.5 MPa. For higher force, the SC125 bore delivers 6136 N push at the same pressure.
At 600 mm stroke, the 25 mm rod is subject to bending moments if side loads are present. For long-stroke applications with even minor lateral force, use an external guide rail or a guided cylinder to protect the rod bearing and seal. When replacing an existing cylinder, match all five points: 100 mm bore, 600 mm stroke, PT1/2 ports, centre trunnion (TC) mount with the F-SC100TC bracket, and confirm whether a magnet is required (this model has no built-in magnet).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X600TC FAQ
At 0.7 MPa (7 bar) operating pressure, this 100 mm bore cylinder produces 5497 N of push force on extension and 3681 N of pull force on retraction. The maximum push force at 0.9 MPa is 7068 N.
Yes, provided the original is a tie-rod cylinder matching 100 mm bore, 600 mm stroke, PT1/2 ports, and a centre trunnion mount. The SC100X600TC includes the TCM1 trunnion bracket (order code F-SC100TC). Note this model does not include a magnet; if your sensors require one, order the -S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X600TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.